| General |
| Number of amplifier channels |
4 |
| Peak total output all channels driven |
10000 W |
| Peak output voltage per channel |
150 V |
| Max output current per channel |
50 A peak |
| Max output power (all channels driven) |
| 2 ohms |
2500 W |
| 4 ohms |
2100 W |
| 8 ohms |
1300 W |
| 16 ohms |
660 W |
| Max output power bridged |
| 2 ohms |
Not recommended 1 |
| 4 ohms |
5000 W |
| 8 ohms |
4200 W |
| 16 ohms |
2600 W |
| Performance |
| THD 20 Hz – 20 kHz at 1 W |
<0.1% |
| THD at 1 kHz and 1 dB below clipping |
<0.05% |
| Signal to Noise Ratio |
>112 dBA |
| Channel separation (Crosstalk) at 1 kHz |
>70 dB |
| Frequency response (1 W into 8 ohms) + 0 / -3 dB |
6.8 Hz – 34 kHz |
| Output impedance @ 100 Hz |
32 mOhm |
| Gain, Sensitivity and Limiters |
| VPL, selectable per ch |
150, 121, 101, 83, 70, 56, 47, 38 V |
| VPL, when bridged 2 |
300, 242, 202, 166, 140, 112, 94, 76 V |
| Voltage Peak Limiter mode (per ch.) |
Hard / Soft |
| Amplifier gain selectable (all channels) – rear-panel switches 2 |
23, 26, 29, 32, 35, 38, 41, 44 dB |
| Default gain |
35 dB |
| Level adjustment (per channel) |
Front-panel potentiometer, 31 position detented from -inf to |
