FEATURE (audio-technica AT4041)
audio-technica AT4041 Cardioid Condenser Microphone
*สอบถามราคาโทร 089-7784447*
- audio-technica AT4041 Smooth, extended frequency response with a slight rise occurring in the high-frequency region
- audio-technica AT4041 Ideal for drum overheads, acoustic guitar, piano, horns and under snare
- audio-technica AT4041 Low-mass diaphragm improves transient response, increases response bandwidth and reduces handling and mechanical noise transfer
- audio-technica AT4041 Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
- audio-technica AT4041 State-of-the-art design and manufacturing techniques ensure compliance with A-T's stringent consistency and reliability standards
- audio-technica AT4041 Switchable hi-pass filter and rugged turned-brass microphone housing
SPECIFICATION (audio-technica AT4041)
| ELEMENT |
Fixed-charge back plate, permanently polarized condenser |
| POLAR PATTERN |
Cardioid |
| FREQUENCY RESPONSE |
20-20,000 Hz |
| LOW FREQUENCY ROLL-OFF |
80 Hz, 12 dB/octave |
| OPEN CIRCUIT SENSITIVITY |
-36 dB (15.8 mV), re 1V at 1 Pa |
| IMPEDANCE |
100 ohms |
| MAXIMUM INPUT SOUND LEVEL |
145 dB SPL, 1 kHz at 1% T.H.D. |
| DYNAMIC RANGE (typical) |
121 dB, 1 kHz at Max SPL |
| SIGNAL-TO-NOISE RATIO |
70 dB, 1 kHz at 1 Pa |
| PHANTOM POWER REQUIREMENTS |
48V DC, 3.2 mA typical |
| SWITCH |
Flat, roll-off |
| WEIGHT |
4.2 oz (120 g) |
| DIMENSIONS |
6.28" (159.5 mm) long,
0.83" (21.0 mm) body diameter |
| OUTPUT CONNECTOR |
Integral 3-pin XLRM-type |
| ACCESSORIES FURNISHED |
AT8405a stand clamp for 5/8"-27 threaded stands; AT8159 windscreen; protective carrying case |
SERVICE/CONTACT (audio-technica AT4041)
สอบถามราคา audio-technica AT4041 เวลาทำการ 8.30-17.30 น.
ขอใบเสนอราคา audio-technica AT4041 ส่งเข้า Email : highclasssound@gmail.com
การสั่งซื้อสินค้า audio-technica AT4041 กรุณาโทรสอบถามสินค้าก่อนการโอนเงินทุกครั้ง
