| SW HDMI Series |
| NOTE |
*Appropriate HDMI to DVI-D cables or adapters are required for DVI signal input/output. |
|
| |
| Video |
| Maximum data rate |
6.75 Gbps (2.25 Gbps per color) |
| Maximum pixel clock |
165 MHz |
| Resolution |
Up to 1920 x 1200 or 1080p @ 60 Hz, 12-bit color |
| Formats |
RGB and YCbCr digital video |
| Standards |
DVI 1.0, HDMI, HDCP |
| NOTE |
The SW HDMI Series switchers support TMDS data rates up to 6.75 Gbps, Deep Color up to 12-bit, 3D, HD lossless audio, and other HDMI specification features. |
|
| |
| Video input |
| Number/signal type |
2, 4, 6, or 8 (depending on model) single link HDMI (or DVI-D*) |
| Connectors |
2, 4, 6, or 8 female HDMI type A |
| |
| Video output |
| Number/signal type |
1 single link HDMI (or DVI-D*) |
| Connectors |
1 female HDMI type A |
| |
| Control/remote — switcher |
| Serial control port |
(1) RS-232, 3.5 mm captive screw connector, 5 pole (shared with auto-input switching control) |
| Pin configuration |
1 = Tx, 2 = Rx, 3 = GND |
| Baud rate and protocol |
9600 baud, 8 data bits, 1 stop bit, no parity |
| Auto-input switching |
(1) 3.5 mm captive screw connector, 5 pole (shared with RS-232) |
| Pin configuration |
Pins 4 and 5 of captive screw connector shared with RS-232 shorted together enable auto-input switching. |
| Contact closure |
1 or 2 (depending on model) 3.5 mm captive screw, 5 pole |
| Pin configuration |
Pin 1 = input 1 contact Pin 6 = input 5 contact
Pin 2 = input 2 contact Pin 7 = input 6 contact
Pin 3 = input 3 contact Pin 8 = input 7 contact
Pin 4 = input 4 contact Pin 9 = input 8 contact
Pin 5 = GND Pin 10 = GND |
| Tally output |
1 or 2 (depending on model) 3.5 mm captive screw, 5 pole |
| Pin configuration |
Pin 1 = input 1 tally ground Pin 6 = input 5 tally ground
Pin 2 = input 2 tally ground Pin 7 = input 6 tally ground
Pin 3 = input 3 tally ground Pin 8 = input 7 tally ground
Pin 4 = input 4 tally ground Pin 9 = input 8 tally ground
Pin 5 = +5 V Pin 10 = +5 V |
| IR controller module |
IR 102 remote control (optional)
30' maximum, 40 degrees off axis |
| Program control |
Extron Simple Instruction Set (SIS™) |
| |
| General |
| Power supply |
|
| SW2 HDMI, SW4 HDMI |
External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1 A, 12 watts |
| SW6 HDMI, SW8 HDMI |
Internal
Input: 100-240 VAC, 50-60 Hz |
| Power consumption |
|
| SW2 HDMI, SW4 HDMI |
|
| Device |
4.5 watts, 12 VDC |
| Device and power supply |
5.2 watts, 12 VDC |
| SW6 HDMI, SW8 HDMI |
8.0 watts |
| Temperature/humidity |
Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling |
Convection, no vents |
| Thermal dissipation |
|
| SW2 HDMI, SW4 HDMI |
|
| Device |
9.5 BTU/hr |
| Device and power supply |
12.1 BTU/hr |
| SW6 HDMI, SW8 HDMI |
17.0 BTU/hr |
| Mounting |
|
| SW2 HDMI, SW4 HDMI |
| Rack mount |
Yes, with optional 1U rack shelf |
| Furniture mount |
Yes, with optional under-desk mounting kit or through-desk mounting kit |
| SW6 HDMI, SW8 HDMI |
| Rack mount |
Yes, with supplied mounting brackets |
| Enclosure type |
Metal |
| Enclosure dimensions |
|
| SW2 HDMI, SW4 HDMI |
1.75" H x 8.75" W x 3.0" D (1U high, half rack wide)
(4.4 cm H x 22.2 cm W x 7.6 cm D)
(Depth excludes connectors.) |
| SW6 HDMI, SW8 HDMI |
1.75" H x 17.5" W x 12.0" D (1U high, full rack wide)
(4.4 cm H x 44.4 cm W x 30.5 cm D)
(Depth excludes connectors.) |
| Product weight |
|
| SW2 HDMI, SW4 HDMI |
0.5 lb (0.3 kg) |
| SW6 HDMI, SW8 HDMI |
2.5 lbs (1.1 kg) |
| Shipping weight |
|
| SW2 HDMI, SW4 HDMI |
2 lbs (1 kg) |
| SW6 HDMI, SW8 HDMI |
5 lbs (3 kg) |
| Vibration |
ISTA 1A in carton (International Safe Transit Association) |
| Regulatory compliance |
|
| Safety |
CE, c-UL, UL |
| EMI/EMC |
CE, C-tick, FCC Class A, ICES, VCCI |
| Environmental |
Complies with appropriate requirements of RoHs and WEEE. |
| Warranty |
3 years parts and labor |
|
